You can compile a daemon for Ubuntu 14.04 using the following instructions.
Update your Ubuntu machine.
sudo apt-get update
sudo apt-get upgrade
Install the dependencies to compile from source code.
Install the necessary dependencies using the following commands.
sudo apt-get install build-essential libssl-dev libdb-dev libdb++-dev libboost-all-dev git libssl1.0.0-dbg
sudo apt-get install libdb-dev libdb++-dev libboost-all-dev libminiupnpc-dev libminiupnpc-dev libevent-dev libcrypto++-dev libgmp3-dev
Create a directory for the source code.
mkdir ~/bin ~/src
cd src
Extract the tar file using the following command.
wget https://github.com/scolcoin/scolcoin/releases/download/NewSource/scolcoin-source.tar.gz
tar -xzvf scolcoin-source.tar.gz
Go to the src directory of your source code.
cd src
Execute the following command to compile the daemon.
make -f makefile.unix RELEASE=1
The compiling will take about 30 minutes depending on your system.
strip scolcoind
cp -a scolcoind ~/bin
cd
cd bin
chmod +x scolcoind
Next Step (Create the configuration file)
mkdir ~/.scolcoin
nano ~/.scolcoin/scolcoin.conf
Paste the following lines in scolcoin.conf
# Use user and password
rpcuser=rpc_scolcoin
rpcpassword=69c863e3356d3dae95df454a1
rpcallowip=127.0.0.1
# Listening mode
listen=1
server=1
txindex=1
daemon=1
# Use as many addnode=
addnode=167.0.148.239
addnode=170.254.3.170
addnode=173.249.25.121
addnode=173.249.52.243
addnode=18.188.171.39
addnode=18.191.249.22
addnode=181.115.8.142
addnode=181.234.48.131
addnode=181.48.26.94
addnode=181.49.83.105
addnode=181.49.83.169
addnode=181.49.87.233
addnode=181.58.4.154
addnode=181.63.73.63
addnode=186.188.107.223
addnode=186.83.31.158
addnode=190.147.176.199
addnode=190.205.237.169
addnode=190.234.168.99
addnode=190.236.195.50
addnode=190.240.131.178
addnode=190.252.32.35
addnode=190.29.167.83
addnode=191.102.222.154
addnode=201.210.84.241
addnode=201.232.239.94
addnode=35.192.215.193
addnode=35.204.222.69
addnode=181.49.83.169
addnode=181.49.87.233
addnode=181.58.4.154
addnode=181.63.73.63
addnode=186.188.107.223
addnode=186.83.31.158
addnode=190.147.176.199
addnode=190.205.237.169
addnode=190.234.168.99
addnode=190.236.195.50
addnode=190.240.131.178
addnode=190.252.32.35
addnode=190.29.167.83
addnode=191.102.222.154
addnode=201.210.84.241
addnode=201.232.239.94
addnode=35.192.215.193
addnode=35.204.222.69
addnode=35.204.88.94
addnode=35.228.82.114
addnode=35.236.161.235
addnode=5.189.144.197
addnode=52.67.195.217
addnode=54.233.220.146
addnode=80.241.211.239
addnode=96.52.68.171
addnode=104.196.18.148
addnode=35.227.103.82
addnode=35.229.81.122
addnode=35.237.59.47
addnode=35.227.30.167
addnode=35.231.87.221
addnode=35.236.161.235
addnode=5.189.144.197
addnode=52.67.195.217
addnode=54.233.220.146
addnode=80.241.211.239
Store with the Ctrl + x key
Question do you want to store? press Y key (Yes)
Then Press key (Enter)
Start your node with the following command.
scolcoind
They will get the message «Scolcoin server starting»
It is already running if you want to turn it off you can put the command
scolcoind stop
if you want to see the current status of the network:
scolcoind getinfo
You will already have the server with the scolcoind configured.